Custom Cut Lumber Alto, TX
Location Zip Code:
Custom Cut Lumber
*** Seasonal Mill Direct Sale on Our 6' Pine Tongue and Groove V-Joint
We mill up 6 inch and 4inch V-Joint paneling for interior
wall covering and outdoor siding in BOTH PINE and CEDAR.
Knotty pine creates a very distinctive rustic style. Its yellow color darkens to a sunshine tone over time. Its features include varied color and distinct wood grain patterns. It is easy to work with and accepts very well coatings of stain, paint and whitewash. This is a good product that it is rather quick to put up and hides the cracks between the boards when installed.
We are currently running a sale on our 6' pine paneling. We normally have discounted mill direct prices for the public but even more so in this season on our pine paneling.
#1and #2 grade 6' pine V-Joint --------------SALE PRICE $0.50 a linear foot (normal price $0.55 a linear foot)
When the paneling is installed and the tongue is fitted into the groove the exposed reveal area of the paneling is actually 5 inches wide. This means the paneling costs $1.20 a square foot when fitted together. Sanded paneling is $1.44 a square foot.
- We accept special orders of 8' PINE V-JOINT PANELING. --------- $0.68 a linear foot
1x6' V-Joint ----------- $1.00 a linear foot
Also available in 3 1/2 inch widths
Top Seller, Beautiful Panels
DO YOU NEED SANDED PANELING? We can prep the boards to make a smooth clear surface prepared for stain or finish. We can send the boards through our drum sander for only 10 cents a linear foot extra.
When the paneling is sent through our molder it makes a consistent shaped profile but there can be some chatter marks because of the spinning blades, slightly vertical raised streaks or rough spots
around some knots.
It is a matter of preference of whether you want it sanded or you are fine with the mechanical markings and rough spots so let us know what you want.
Interior and Exterior Applications:
- Wall Covering
- Outdoor Siding
- Porch Ceiling
- Soffit Roof Eaves Enclosure
We also offer other related quality building products.
--- 1 1/2' flat Tongue & Groove for ROOF UNDERLAYMENT PLANKING / CEILING BOARDS AND SIDING.
Our 1 1/2' V-Joint is shaped with beveled edges on the bottom side
and works well for vaulted ceilings - making a beautiful exposed
ceiling. The top side is flat and ready to apply felt paper before
laying on the roof. The planking is strong and capable for the roof
load weight. When felt paper and a layer of foam insulation is added,
the surface is prepared for sheet metal roofing to be applied directly
on top and fastened to the V-Joint.
--- 6' HALF-LOG SIDING (tongue & groove edges for easy,
Pine ------------$0.85 /linear ft.
Cedar ----------$1.85 /linear ft.
We currently have a 6 or more week materials lead time on our cedar log siding.
--- BOARD AND BATTEN SIDING. We provide rough cut or planed 1x12, 1x10, or 1x8 pine or cedar boards. and cut 1x2, 1x3 or 1x4 strips for battens between the siding. This is an in demand product.
- PINE FLOORING
5 inch wide reveal ------------------------- $0.55 a linear foot
Also available in 3 1/2 inch widths
We cut custom lumber orders and supply a wide variety of cuts in addition to 1x6 s4s material and V-Joint. We cut beams, 1x12, 1x10 or 1x8 siding boards with battens, clap board siding, log cabin siding, live edge cedar siding, framing lumber, cedar cants, tongue and groove flooring, oak trailer decking, cedar decking, live edge fence boards, crown molding, mantles, wide tabletop and countertop slabs, stair treads, shelf boards and furniture building materials to list a few.
We cut fine quality hardwoods as walnut, pecan, hickory and cypress in addition to pine, cedar, oak, sweetgum and other woods.
You are welcome to bring us your own logs and we will cut them for you. We charge $0.35 a board foot for straight pine and cedar and $0.80 for oak. We can cut any species. We are able to cut bent logs for a higher cost. Our mill facility has a band mill that can cut 36 inch logs 6 to 32 feet long, a wide throat band mill that can cut 48 inch or odd shaped logs up to 16 foot long, a large production circle sawmill and resaws and board edgers for lumber. We also can resaw used, reclaimed and salvaged beams into dimensional lumber. The lumber is cut rough cut. We can plan the lumber for an additional price.
We are located in Alto, Texas (South of Tyler, TX / West of Nacogdoches, TX). Alto is right along the Highway 69 route stretching between Dallas and Houston. We are located about halfway between Dallas and Houston.
We serve the nearby states of Oklahoma, Kansas, Louisiana, Tennessee, Arkansas, Alabama, Mississippi, Kansas, Missouri, New Mexico, and Colorado and can send trucks anywhere in the lower 48 states.
We supply customers in the local towns and cities of Dallas, Fort Worth, Denton, Plano, Garland, Mesquite, Arlington, Irving, Abilene, Sulphur Springs, Texarkana, Mount Pleasant, Tyler, Mineola, Lindale, Kilgore, Longview, Marshall, Henderson, Carthage, Athens, Corsicana, Jacksonville, Palestine, Crockett, Rusk, Bullard, Wells, Nacogdoches, Mount Enterprise, Timpson, Center, Huntington, Zavalla, Diboll, Corrigan, Woodville, Lufkin, Beaumont, Killeen, Jerrell, Austin, Temple, Round Rock, Lakeway, San Marcos, New Braunfels, San Antonio, Seguin, Victoria, Sweeny, Corpus Christi, Huntsville, Livingston, Conroe, Houston, Lake Charles, Seabrook, Galveston, and more.
Truck shipping available.
We accept major credit cards.
Randall's cell (325) 428-669five
(call, text, or leave a voice message)
Mill office (936)858-280seven
firstname.lastname@example.org(cut and paste to your email)
(Email is the prefered mode of communication for straightforward inquiries)
( llamar, texto o dejar un mensaje de voz )
Facebook - Custom Cut Lumber (Alto, Texas)
(See Hundreds of pictures in our public photo albums and more what we offer on Facebook.
It is not necessary to have a personal Facebook profile in order to see our page. Like us to stay connected and receive updates)
Keywords: Building Material, Manufacturing, Supply, Planks, Boards, Lumber, Saw Mill, Hardware, Wood Product Sales, Home Repair, Remodel, Construction, Carpentry, Woodworking, Sawmill