1984 MD 128 90% restored with belt drive Hydrostatic Drive upgrade components available    26' of track, 7' end stands, 10' cross track, electric lift, electric start, 532 hours on 1700cc motor, 120 to 130 psi compression. Recently I completed sandblasting, priming and painting the carriage and track. The attached pictures are of this mill prior to the track and carriage restoration. One picture is of the newly painted carriage in our garage. The mill is currently disassembled. Last year, the following work was completed: New Solex carburetor, fuel pump, gas can, oil cooler, plugs, wires, coil, points and cap. New belts, Fan shroud restored, end stands, cross members and torque rods restored or replaced. New Push Rod Tubes, Dolly Tires. Many other new parts. I have planned on upgrading the belt drive to Hydrostatic, but haven't been able to get to it yet. Price: $20,000 as is. This is recently lowered from $25,000 to move it. After summer, I am going to try to finish the hydro upgrade. If it hasn't sold by then the price will be higher. The hydro drive pump and pulley are available for an additional charge, which would include guidance through doing the upgrade if necessary. Delivery is available anywhere in the US. Jim (six03) 63one-570seven